EK-RES X3 150 RGB

Tootekood: EK-RES X3 150 RGB
Kaubamärk:
Ühik: tk
Tarneaeg: k
Hind:
93,98 €

The EK-RES X3 150 RGB is a versatile multiport standalone RGB reservoir with pre-installed 4-pin 12V RGB LED stripThe number inlet/outlet port configuration options on these reservoirs and the simple but effective mounting kit make the loop building with this reservoir a straightforward process.

PLEASE NOTE: 

- Do not use or clean reservoir with alcohol derivates or other solvents as acrylic may crack!

Details

The EK-RES X3 150 RGB is a versatile multiport standalone RGB reservoir. The number inlet/outlet port configuration options on these reservoirs and the simple but effective mounting kit make the loop building with this reservoir a straightforward process.

EK-RES X3 series reservoirs are cylindrical standalone solutions, manufactured from premium quality 60mm acrylic tube and POM Acetal end caps in black color. An airtight sealing is ensured by quality EPDM rubber washers at both ends of the reservoir. With the total of six G1/4" ports, the EK-RES X3 150 RGB reservoir make the filling, tube routing and draining, an easy task.

EK-RES X3 150 RGB

The reservoir comes with a pre-installed anti-vortex insert and the capacity of the EK-RES X3 150 RGB variant is around 240ml of liquid. The package also includes a polyether anti-cyclone foam to optionally replace the acrylic anti-vortex insert.

EKWB RGB Compatibility

Compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header.

EK-RES X3 series reservoirs come with a pair of EK design reservoir holders using adjustable fastening force controlled by the enclosed Allen key.

Technical data:
- Installation height: 150mm 
- Diamter: 60mm 
- Capacity: ~240ml 
- RGB connector classic 4-pin (12+ R G B)

Enclosed: 
EK-RES X3 150 RGB
- Pair of EK reservoir holders with mounting screws
- 2 × G1/4 extenders
- 4 × G1/4 Plugs 
- 1 × 2,5mm Allen key for reservoir holders
- 1 × polyether anti-cyclone foam

Made in Slovenia - EU!

PLEASE NOTE:

  • When using ports #3, #4 or #6 it is mandatory to use the enclosed EK-Extender G1/4" due to the ports being recessed into the plastic Reservoir Bottom.
  • When using EK-Extender G1/4 make sure not to use fittings or barbs with G1/4" thread longer than 5mm!
  • When using ports #1 and #2 make sure not to use fittings or barbs with a diameter larger than 25mm!
  • The installed 4-pin RGB LED stripe is compatible with every major motherboard manufacturer and mainstream RGB controller.
  • Port #6 of EK-RES X3 series reservoir should only be used to connect this reservoir with an external fill port.
  • Do not clean reservoir with alcohol derivates or other solvents as the acrylic may crack!

Additional Info

Threads G1/4
Sarnased tooted
Tootekood: 16mm/toru ,   Tarneaeg: 3-5 Tööpäeva
9,84 €

Mayhemsi Pastel jahutusvedelik on maailma parim, nano tehnoloogial valmistatud jahutusvedelik. Jahutusvedelikud on mõeldud nii profesonaalidele kui ka harrastajatele. Need on loodud Mayhemsi koostööl koos Ice Dragon Coolinguga. Mayhemsi jahutusvedelike valik ületab turul kõik, oma suurepärase värvi valiku ja jahutusvõimsusega.

Mayhemsi pastellide komplekt ühendab mitmed erinevad tehnoloogiad ja see on kõik ühes tootes, alates värvainetest kuni Nano tehnoloogiani ja loomulikult ka natuke Mayhemsi maagiat. Süsteemi tööiga on umbes kaks aastat, mis on ette nähtud pikaajaliseks kasutamiseks. Võrreldes teiste sarnaste toodetega mille kasutusaeg on umbes üks aasta.

Omadused ja eelised

  • Fooliumiga suletud pakend
  • Võimalik kasutada koos kõigi Mayhems Dyes toonidega, et segada endale sobiv värv.
  • Vastab mitte-mürgiste korrosiooni ja katlakivi inhibiitorite segude: vask, messingi, teras, nikli ja alumiiniumi kaitseks vastavalt standarditele ASTM D3306 ja BS6580.
  • Väga madal toksilisus, vähem kui propüleenglükoolil.
  • Sisaldab kõiki vajalikke biotsiide.
  • külmumispunkt -8C
  • Kaitseb katlakivi ja teiste setete tekkimist süsteemi
  • Keemispunkt: kuni 95° C (survest sõltuv)
  • Võib säilitada kuni kolm aastat, jahedas ja kuivas keskkonnas
  • Toodetud Ühendkuningriigis
Tootekood: PPB Pastel Pure Black ,   Tarneaeg: 3-5 Tööpäeva
15,44 € (10%)
17,16 €

EK-Supremacy EVO RGB is a flagship high-end, highly adaptable CPU water block, just as all the other EK-Supremacy EVO models so far. By combining jet plates and jet inserts, the cooling engine enables the water block to be fine-tuned for all mainstream Intel and AMD sockets for maximum performance. A high-flow design with low hydraulic restriction also allows this product to be used in setups using weaker water pumps or lower pump speed for added silent operation. The water block comes with pre-installed 4-pin 12V RGB LED strip. 

Tootekood: EK-Supremacy EVO RGB - Nickel ,   Tarneaeg: Küsi tarneaega
128,62 €

Remote type 8 lines RGB light controller(Aurora) No Color

Tootekood: DK201 ,   Tarneaeg: 3-5 Tööpäeva ,   Vali värv:
15,29 €
Tootekood: FBRE1-200Y ,   Tarneaeg: 3-5 Tööpäeva ,   Vali värv:
121,42 €