EK-FC1080 GTX Ti - Nickel

Tootekood: EK-FC1080 GTX Ti - Nickel
Kaubamärk:
Ühik: tk
Tarneaeg: Küsi tarneaega
Hind:
165,98 €

EK-FC1080 GTX Ti is a high-performance full-cover water block for NVIDIA GeForce GTX 1080 Ti graphics card, based on 

 

 

Details

EK-FC1080 GTX Ti is a high-performance full-cover water block for NVIDIA GeForce GTX 1080 Ti graphics card, based on

This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC1080 GTX Ti water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.

 

The base of the block is made of nickel-plated electrolytic copper while the top is made of quality acrylic material. The top also features two pre-drilled slots for 3mm diodes. The sealing is ensured by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.

EKWB recommends the purchase of aesthetic retention backplate (EK-FC1080 GTX Ti Backplate - Black, Nickel) which improves the looks of your graphics cards and also provide some passive cooling to the circuit board VRM section.

G1/4" threaded fittings can be used on both sides of the FC terminal. Up to four EK-FC1080 GTX Ti water blocks can be used on a single ATX form factor motherboard by using EK-FC Terminal (DUAL, TRIPLE or QUAD type) system or other means of interconnectivity. Please note that EK-FC Bridge & Link system is not compatible with this water block.

The block also features a special plastic cover over the block Terminal. This add-on is designed to reveal the graphics card model, visible from the side. The terminal cover is removable, it is fitted with 2 screws from the side. EK also encloses a single-slot I/O bracket which replaces the original two-slot in order to make installation of multiple graphics cards easier and also transforms the GPU into a gorgeous single slot solution.

Enclosed:

- EK-FC1080 GTX Ti series water block 
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- 2x EK plug G1/4”
- 6mm Allen key
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)

 

PLEASE NOTE:

  • Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • NVIDIA® GeForce GTX 1080 Ti factory backplate is not compatible with this water block!
  • New NVIDIA® SLI HB bridges are compatible with this water block.
  • Check your toolbox if you are missing this special Hex adapter for some of the screws.
  • Fittings are just for showcase and are not included!
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Prepared for LED Diode 3mm
Chip Manufacturer Nvidia GeForce
Sarnased tooted

Mayhemsi Pastel jahutusvedelik on maailma parim, nano tehnoloogial valmistatud jahutusvedelik. Jahutusvedelikud on mõeldud nii profesonaalidele kui ka harrastajatele. Need on loodud Mayhemsi koostööl koos Ice Dragon Coolinguga. Mayhemsi jahutusvedelike valik ületab turul kõik, oma suurepärase värvi valiku ja jahutusvõimsusega.

Mayhemsi pastellide komplekt ühendab mitmed erinevad tehnoloogiad ja see on kõik ühes tootes, alates värvainetest kuni Nano tehnoloogiani ja loomulikult ka natuke Mayhemsi maagiat. Süsteemi tööiga on umbes kaks aastat, mis on ette nähtud pikaajaliseks kasutamiseks. Võrreldes teiste sarnaste toodetega mille kasutusaeg on umbes üks aasta.

Omadused ja eelised

  • Fooliumiga suletud pakend
  • Võimalik kasutada koos kõigi Mayhems Dyes toonidega, et segada endale sobiv värv.
  • Vastab mitte-mürgiste korrosiooni ja katlakivi inhibiitorite segude: vask, messingi, teras, nikli ja alumiiniumi kaitseks vastavalt standarditele ASTM D3306 ja BS6580.
  • Väga madal toksilisus, vähem kui propüleenglükoolil.
  • Sisaldab kõiki vajalikke biotsiide.
  • külmumispunkt -8C
  • Kaitseb katlakivi ja teiste setete tekkimist süsteemi
  • Keemispunkt: kuni 95° C (survest sõltuv)
  • Võib säilitada kuni kolm aastat, jahedas ja kuivas keskkonnas
  • Toodetud Ühendkuningriigis
Tootekood: PR Pastel Red ,   Tarneaeg: 3-5 Tööpäeva
15,44 € (10%)
17,16 €

EK-FC Radeon Vega RGB is a high-performance full-cover water block for multiple AMD® Radeon® Vega based graphics cards that comes with pre-installed 4-pin 12V RGB LED strip.

Tootekood: EK-FC Radeon Vega RGB - Nickel ,   Tarneaeg: Küsi tarneaega
179,04 €

EK-XRES 140 Revo D5 RGB PWM (incl. sl. pump) is a High-Performance water cooling pump with integrated reservoir. This unit offers increased hydraulic performance (up to 15 %) compared to original factory top. This unit has black sleeved cables.

Tootekood: EK-XRES 140 Revo D5 RGB PWM (incl. sl. pump) ,   Tarneaeg: Küsi tarneaega
201,40 €

The EK-KIT G280 is the ultimate liquid cooling kit dedicated to all users want to take advantage of their 5.25" bays. This is the easiest way to start with their first custom loop at the best price-performance ratio on the market! Everything you need to assemble your first custom loop with carefully chosen components that will last you a long time! By using the 5.25" drive bays for a reservoir and pump combo unit, more space is available inside of the case which brings a more even and direct airflow. 

Tootekood: EK-KIT G280 ,   Tarneaeg: Küsi tarneaega
367,03 €
Tootekood: LD2RT-50 ,   Tarneaeg: 3-5 Tööpäeva ,   Vali värv:
12,46 €