EK-FC GeForce GTX FE RGB - Nickel

Tootekood: EK-FC GeForce GTX FE RGB - Nickel
Kaubamärk:
Ühik: tk
Tarneaeg: Küsi tarneaega
Hind:
179,04 €

EK-FC GeForce GTX FE RGB is a high-performance full-cover water block for multiple NVIDIA® GeForce® GTX and Titan Pascal series graphics cards that comes with pre-installed 4-pin 12V RGB LED strip. 

Details

EK-FC GeForce GTX FE RGB is a high-performance full-cover water block for multiple NVIDIA® GeForce® GTX and Titan Pascal series graphics cards that comes with pre-installed 4-pin 12V RGB LED strip. 

EK-FC GeForce GTX FE RGB 

This water block directly cools the GPU, RAM, and VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC GeForce GTX FE water block features a central inlet split-flow cooling engine design for best possible cooling performance, which also works flawlessly with reversed water flow without adversely affecting the cooling performance. This kind of efficient cooling will allow your high-end graphics card to reach higher boost clocks, thus providing more performance during gaming or other GPU intense tasks. Moreover, such design offers great hydraulic performance allowing this product to be used in liquid cooling systems using weaker water pumps.

 

This product is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header. You can easily remove the LED strip cover which is mounted with two screws to replace the LED strip with some other type LED strip.

EK RGB All

 

The base of the block is CNC machined out of nickel-plated electrolytic copper while the top is CNC machined out of high-quality acrylic material. The sealing is ensured by quality rubber O-rings. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure.

EK® recommends the purchase of a retention backplate which improves the aesthetics of your graphics cards, but also provides additional passive cooling to the GPU core and circuit board VRM section. The EK-FC GeForce GTX FE RGB water block is backward compatible with all EK-FC1080 GTX Backplates, EK-FC1080 GTX Ti Backplates, and EK-FC Titan X Pascal Backplates.

G1/4" threaded fittings can be used on both sides of the FC terminal and for multiple GPU connectivity, please refer to our offer of GPU Terminals.

The block also features a special plastic cover over the block Terminal. This add-on is designed to reveal the graphics card model, visible from the side. The terminal cover is removable, it is fitted with 2 screws from the side.

The EK-FC GeForce GTX FE RGB water block is compatible with all reference design GeForce GTX 1060, GeForce GTX  1070, GeForce GTX  1080, GeForce GTX 1080 Ti, GeForce Titan X (Pascal) and GeForce Titan Xp based graphics cards. The current compatibility list rounds up a total of 106 graphics cards that are on the market, but as always, we recommend that you refer to the EK Cooling Configurator for a precise compatibility match.

Technical specifications:

- RGB cable length: 30cm
- RGB connector classic 4-pin (12+ R G B)

Enclosed:

- EK-FC GeForce GTX FE RGB series water block 
- Mounting mechanism with screw-in brass standoffs
- Necessary mounting screws, nuts, and washers
- 2x EK plug G1/4”
- 6mm Allen key
- Thermal pads
- Thermal grease EK-TIM Ectotherm (1g)

Made in Slovenia - Europe!

PLEASE NOTE:

  • Due to an immense variety of fittings/barbs available on the market and no prescribed standards, we guarantee compatibility only for connectors bought from our website.
  • NVIDIA® GeForce GTX factory backplate is not compatible with this water block!
  • New NVIDIA® SLI HB bridges are compatible with this water block.
  • Check your toolbox if you are missing this special Hex adapter for some of the screws.
  • Fittings are just for showcase and are not included!
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Additional Info

Material / Design / Color option Nickel Plexi
Threads G1/4
Chip Manufacturer Nvidia GeForce
Sarnased tooted

Omadused

· Maksimaalne efektiivsus
· Pinna korrosiooni, saaste ja oksüdatsiooni kiire neutraliseerimine
· Mineraaljääkide järeleandmatu eemaldamine
· Suurepärane tahkete osakeste kõrvaldamine
· Vähene vahutamine
· Talub hästi karedat vett
· Võib kallata kanalisatsiooni vette.
· Hoolikal kasutamisel on seda üsna lihtne käsitseda ja kasutada
· Võib parandada soojusülekannet

Tootekood: BK Blitz Kit ,   Tarneaeg: 3-5 Tööpäeva
34,48 €

EK-XTOP Revo D5 PWM is a high-performance liquid cooling pump. This unit offers increased hydraulic performance (up to 15 %) compared to original factory top. This unit has black sleeved cables.

Tootekood: EK-XTOP Revo D5 PWM - Plexi (incl. sleeved pump) ,   Tarneaeg: Küsi tarneaega
165,98 €

Rotary Metalic Cube Tee - 3Way Black

Tootekood: TX3T-A01 ,   Tarneaeg: 3-5 Tööpäeva ,   Vali värv:
10,70 €
About Barrow

BARROW brand is committed to creating the most suitable for your products. High quality raw materials + professional environmental coating. Exquisite production technology + the whole produce chain control. High value products + reasonable product price. Because the focus, so professional. 

We are official authorized dealer, We provide the best services and products and related technical advice.

 

Characteristic & Specifications

Model: SPB17-245 
Power Input: 4Pin D
RPM: Max 4000rpm
Max Power: DC12V Max 17W
Voltage: 12v 
Lift: 5.5M
Max Flow: 960L/H
Material: POM/PMMA
Heatsink: Aluminium alloy
Color: Multicolor
Size: 62*62*245

Tootekood: SPB17-245 ,   Tarneaeg: 3-5 Tööpäeva ,   Vali värv:
96,02 €
Tootekood: TYKN-K16 V4 ,   Tarneaeg: Küsi tarneaega ,   Vali värv:
8,89 €