EK-DBAY D5 PWM MX - Acetal (incl. pump)

Tootekood: EK-DBAY D5 PWM MX - Acetal (incl. pump)
Kaubamärk:
Ühik: tk
Tarneaeg: Küsi tarneaega
Hind:
175,82 €

EK-DBAY D5 PWM MX is a reduced cost variant of EK-DBAY D5 high-performance hydraulically improved pump top (volute) with a two-slot 5.25" drive bay form factor reservoir and integrated Xylem D5 PWM water pump.

Details

EK-DBAY D5 PWM MX is a reduced cost variant of EK-DBAY D5 high-performance hydraulically improved pump top (volute) with a two-slot 5.25" drive bay form factor reservoir and integrated Xylem D5 PWM water pump. PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode!

This type of design makes the use of 5.25" drive bay slots in order to provide more room for other components when facing limited space constraints. Made from injection moulded black ABS polymer, this sturdy, monoblock design guarantees maximum reliability and rigidity! Locking ring nut for the pump is made from black anodized CNC machined aluminum.

The unit features one G3/8" threaded port on the top of the reservoir which serves as a fill port for the system. Other ports are standard G1/4" threaded - three on the backside of the unit to be used as inlet and outlet ports and one on the bottom that can be used as a drain port - and allow for installation of virtually any G1/4" threaded fitting / barb. EK recommends EK-ACF compression fittings.

Integrated anti-cyclone made from acrylic glass effectively prevents excessive vortex formation of the liquid.

EK-DBAY D5 MX is designed with anti-vibration rubber mounting system. This floating design effectively silences this pump / reservoir setup by de-coupling it from the rest of the computer chassis.

The front cover is made of quality acrylic glass and covered with an aesthetic aluminium bezel cover.

EK-Cable Pump testing adapter is recommended to be used for testing purposes while leak-testing your loop and is intended to be connected directly to PSU, without the need for powering up the entire system.

Pump electrical and mechanical properties:
- Motor: Electronically commuted spherical motor
- Rated voltage: 12V DC
- Power consumption: 23W
- Maximum pressure head: 3.9m
- Maximum flow: 1500L/h
- Maximum system temperature: 60°C
- Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
- Power connector:  4-Pin Molex- and 4-Pin PWM FAN connector

Operational regime:
- PWM duty cycle: ~ 20-100%
- Default behavior: Runs at 100% duty cycle when no PWM feedback signal is present

Enclosed:
- EK-DBAY D5 MX with EK-D5 PWM
- Mounting mechanism
- Installation manual
- Set of plugs and extenders
- Set of required Allen keys

Made in Slovenia - EU!
Pump motor made in Hungary - EU!

PLEASE NOTE:

  • EK-D5 PWM G2 is an enhanced variant of the world renown Xylem D5 with improved power management control, which allows for better speed control trough motherboard BIOS or dedicated fan controller.
  • This product should NOT be installed with any aluminum Fluid Gaming parts!

Additional Info

Threads G1/4, G3/8
Sarnased tooted

Mayhemsi Pastel jahutusvedelik on maailma parim, nano tehnoloogial valmistatud jahutusvedelik. Jahutusvedelikud on mõeldud nii profesonaalidele kui ka harrastajatele. Need on loodud Mayhemsi koostööl koos Ice Dragon Coolinguga. Mayhemsi jahutusvedelike valik ületab turul kõik, oma suurepärase värvi valiku ja jahutusvõimsusega.

Mayhemsi pastellide komplekt ühendab mitmed erinevad tehnoloogiad ja see on kõik ühes tootes, alates värvainetest kuni Nano tehnoloogiani ja loomulikult ka natuke Mayhemsi maagiat. Süsteemi tööiga on umbes kaks aastat, mis on ette nähtud pikaajaliseks kasutamiseks. Võrreldes teiste sarnaste toodetega mille kasutusaeg on umbes üks aasta.

Omadused ja eelised

  • Fooliumiga suletud pakend
  • Võimalik kasutada koos kõigi Mayhems Dyes toonidega, et segada endale sobiv värv.
  • Vastab mitte-mürgiste korrosiooni ja katlakivi inhibiitorite segude: vask, messingi, teras, nikli ja alumiiniumi kaitseks vastavalt standarditele ASTM D3306 ja BS6580.
  • Väga madal toksilisus, vähem kui propüleenglükoolil.
  • Sisaldab kõiki vajalikke biotsiide.
  • külmumispunkt -8C
  • Kaitseb katlakivi ja teiste setete tekkimist süsteemi
  • Keemispunkt: kuni 95° C (survest sõltuv)
  • Võib säilitada kuni kolm aastat, jahedas ja kuivas keskkonnas
  • Toodetud Ühendkuningriigis
Tootekood: PPi Pastel Pink ,   Tarneaeg: 3-5 Tööpäeva
15,44 € (10%)
17,16 €

EK-FC1080 GTX Ti is a high-performance full-cover water block for NVIDIA GeForce GTX 1080 Ti graphics card, based on 

Tootekood: EK-FC1080 GTX Ti - Nickel ,   Tarneaeg: Küsi tarneaega
165,98 €

90°Rotary Adapter (Male to Female) Black

Tootekood: TWT90-v2.5 ,   Tarneaeg: 3-5 Tööpäeva ,   Vali värv:
7,20 €
Tootekood: LD2RT-50 ,   Tarneaeg: 3-5 Tööpäeva ,   Vali värv:
12,46 €
Tootekood: FBRE1-200Y ,   Tarneaeg: 3-5 Tööpäeva ,   Vali värv:
121,42 €